Product name: 1/10 RC remote control high-speed bicycle (BURST MODE)
Car shell color: red white/blue orange
Body size: length 430mm × width 300mm × height 155mm
Remote control size: length 157mm × width 106mm × height 205mm
Wheelbase: 270mm
Wheelbase: 245mm
Wheel specifications: diameter 110mm × width 60mm
Ground clearance: 40mm
Transmission ratio: 1:11.15
ESC: integrated 60A (does not support 3S)
Motor: 550 carbon brush motor, 16000 rpm
Servo: three-wire 6KG digital servo
Battery: 7.4V 2S polymer soft pack lithium battery, 2300mAh, 30C, XT60 interface
Cooling system:
Electrically adjustable fan (25×25×10mm),
Motor fan (30×30×10mm)
Aluminum motor heat sink
Top speed: 33KM+
Remote control distance: ≥100 meters
Transmission frequency: 2.4GHz (supports multiple vehicles competing in the same field)
Remote control batteries: 4 AA LR6 1.5V (need to bring your own)
Remote control functions: throttle/steering control, speed adjustment wheel, light control button, steering fine adjustment, rudder amount fine adjustment, steering reverse switching, gyro adjustment knob (gyro needs to be purchased separately)
Adjustable trigger, 25 degree angle steering wheel,
Remote control category: Full proportional synchronous control system (gun control)
Charging time: 3.5-4 hours
Battery life: about 12 minutes
Charger type: USB balanced charger
Car shell material: 100C high toughness explosion-proof PVC car shell + PA nylon material
Lighting configuration: Adjustable in three modes: headlights (white), front grille lights (orange), roof lights (white)
safety and protection
Low-voltage protection: Automatic power-off when the body battery is lower than 6V; the remote control automatically sleeps if there is no operation for 5 minutes and needs to be restarted
Charging protection: constant current and constant voltage balanced charging, protection function for battery overcharge and overcurrent
Stuck protection: When overloaded, the motor stops working
Packing
Packaging size: 41.5cm × 30.8cm × 20.5cm
Vehicle weight: 2820g
Remote control weight: 260g
Packing weight: 4190g
Packing list
Remote control car×1,
Remote control × 1,
Lithium battery × 1,
Instruction × 1,
Charging cable × 1,
Head wheel assembly x1,
Velcro × 1,
Screwdriver × 1,
L-shaped sleeve × 1,
Hexagonal socket×1,
Anti-lost buckles × 4,
Tail×1、
Tail screws×2,
Wire diameter 1.6mm shock absorbing spring × 4
Product functions and selling points
Basic functions: full-ratio continuously variable transmission, high-speed driving, rapid acceleration, deceleration, braking, reversing, left turn, right turn
Applicable terrain: flat ground, sandy ground, mud ground, grassland
Featured configurations: quick-release motor, three-speed adjustable lifting wheel
Chassis and Suspension
Chassis Material: PA Nylon
Transmission Components: Medium carbon steel front universal joint (CVD), medium carbon steel rear dogbone, medium carbon steel wheel cups, medium carbon steel differential cups
Damping System: Adjustable aluminum hydraulic shock absorbers
Suspension Structure: Double wishbone independent suspension
Body Structure: Aluminum alloy I-beam second floor plate, aluminum alloy chassis reinforcement plate, zinc alloy arm brackets, medium carbon steel central transmission
Steering Components: Zinc alloy steering knuckles
Bearing Configuration: 26 ball bearings throughout the vehicle
Differential Structure: Fully sealed powder planetary gear differential
Drive Type: Full-time four-wheel drive
Gear Specifications: Powder motor gear 13T (module 0.8), powder main gear 58T (module 0.8)
Tire Configuration: TPR rubber tires + sponge inner liner, with 12mm zinc alloy couplings
